Retaining the fast-moving, compact design of the original, the new Spikie+® generates 25% more lumen output from its single 60W RGBW source, giving you even more impact!

With a 110mm specifically designed front lens, Spikie+® rapid moving zoom produces beams from a tight, sharp 4-degrees out to a soft wide 28-degree wash.

Spikie+® creates visual splendour with our Robe patented MCFE™ - Multi-Coloured Flower Effects - creating sharp multicoloured spikes of light, rotating bi-directionally with variable speed.

The unique Beam Effects Engine transforms the output into three piercing rays of narrow beams, while continuous pan and tilt movement creates another layer of dynamism to your show.

Colour management includes CMY or RGBW mixing modes; a variable CTO from 2.700K to 8.000K; Tungsten lamp thermal delay/red shift effects with whites at 2.700K or 3.200K.

Small and compact, weighing just 7.3 kg, Spikie+® permits rigging at any angle, is supplied with one Omega bracket and is available in cardboard, single, quad or eight-pack cases.

Light source

60W RGBW LED

Light output

1.550 lm, 11.000 lx @ 5 m

Zoom range

4°–28°

Effects

MCFE™ - Multi-Coloured Flower Effects (patented), Colour Rainbow Effect, 3 Facet Prism

Innovations

DataSwatch™ – inbuilt virtual colour library

The DataSwatch™ inbuilt virtual colour library for Robe LED fixtures provides consistent colour rendering with commonly matched filter ranges, allowing for rapid and accurate programming.

MCFE™ – Multi Coloured Flower Effect

The Robe patented MCFE™ – Multi-Coloured Flower Effect – creates sharp, multi-coloured spikes of light, that are fully rotatable in both directions, at variable speeds.

L3™ – Low Light Linearity System

The L3™ Low Light Linearity System produces imperceptible, ultra-smooth fades to black.

GDTF – General Device Type Format

The General Device Type Format creates a unified definition for exchange of data for the operation of intelligent luminaries, such as moving lights. The file format is human readable and developed using open source formats.

Tungsten Emulation

When selected, the luminaire will mimic the colour temperature of a tungsten lamp as you lower the output to produce that classic warm glow.

Product Video

Accessories

Technical Specification

Expand AllDownload PDFCollapse All

Source

Light source type: 60W RGBW LED

LED life expectancy: min. 50 000 hours

Typical lumen maintenance: L70/B50 @ 50.000 hours

Optical system

Dynamic Effects and Features

Colour mixing mode RGBW or CMY

Variable CTO: 2.700K - 8.000K

Virtual Colour Wheel: with 66 preset swatches

Tungsten lamp effect at whites: 2.700 K and 3.200 K (red shift and thermal delay)

Colour rainbow effect with variable speed

MCFE™ - Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patented)

Prism: 3-facet circular rotating prism

Motorized zoom

Shutter: Electronic with variable speed strobe (max.20 flashes per second)

Pre-programmed random strobe & pulse effects

High resolution electronic dimming: 0 - 100%

Control and programming

Movement

Thermal specification

Electrical specification and connections

Approvals

Mechanical specification

Rigging

Included items

Optional accessories

Wireless DMX external module: 10980127

Trigger Clamp Doughty: 17030386

Safety wire 36 kg: 99011963

Mains Cable powerCON TRUE1 In/Schuko, 2m, Indoor 13052405

Mains Cable powerCON TRUE1 In/US, 2m, Indoor 13052406

Mains Cable powerCON TRUE1 In/CEE 16A, 2m, Indoor 13052445

Mains Cable powerCON TRUE1 In/open ended, 2m, Indoor 13052407

Daisy Chain powerCON TRUE1 In/Out, EU, 2m, Indoor 13052439

Daisy Chain powerCON TRUE1 In/Out, US, 2m, Indoor 13052440

Daisy Chain powerCON TRUE1 In/Out, EU, 5m, Indoor 13052444

Single Top Loader Case: 10120193

Quad Top Loader Case: 10120203

Eight Pack Top Loader Case: 10120198

Quad Foam Shell: 20020278

Spikie/MotionCamera Single Foam Shell: 20020321

Legal

Related News

29.11.2022

Color mixing improvements for T11, timed gobo transitions for Forte and more software improvements

We have released software updates for several Robin series devices to improve color mixing, add smoother framing shutters movement and enhance gobo wheel behavior. Read on for more details.

3.5.2022

Back at Prolight with Impressive Live Show and Lots More …

Czech Republic-based moving and LED lighting manufacturer Robe lighting s.r.o. rocked back to major live exhibition shows with a dazzling new live production, CUETE & The Beast, created exclusively for the Prolight+Sound 2022 expo and presented last week in Frankfurt, Germany.