Need something exceptional to stand out from the crowd? Something very different to create a powerful signature effect. Lack that missing X factor? Then go to the extreme with the visually sensational TetraX™!

Developed from the immensely successful Tetra1™, the TetraX™ adds dynamic pan movement with extremely high-speed continuous rotation, dramatically increasing sweeping effect possibilities of the fixture.

Generating an ultra-tight 4° beam from each of the 9 evenly spaced pixels, they combine to produce a bright, defined “sheet” of light, as desired by Lighting Designers. The homogenised beams and smooth 11:1 motorised zoom provide ultra-smooth washes out to 45°.

TetraX™ sets itself apart by including three exclusive eye-catching Robe patented MCFE™ – Multi-Coloured Flower Effect – emitting sharp, multi-coloured spikes of light, with variable speed and rotation direction control, to further increase the projection of charismatic in-air animations.

All-inclusive colour and dimming control are available via RGBW and CMY colour mixing modes; variable CCT of 2.700K – 8.000K; tungsten emulation simulating the red shift and thermal delay of tungsten lamps for whites from 2.700K – 4.200K; DataSwatch™ 237 pre-programmed colour library; L3™ Low Light Linearity dimming software for imperceptible fades to black.

An Epass™ Ethernet switch ensures sustained network connectivity. A wide range of protocols (sACN, Art-Net or Kling-Net) allows quick network installation and control from media servers, DMX, or the internal effects engine.

TetraX™ – eXceeding the eXeptional

Light source

9x 40W RGBW LED multichips

Light output

5.300 lm (integrating sphere)

Zoom range

4° - 45°

Effects

3x MCFE™ Multi-coloured Flower Effects (patented), pixel control, continuous pan rotation

Innovations

RLCT™ – Robe lens coating technology

Just like with spectacles, our lens coating technology protects soft plastic lenses against surface scratches, that can even occur during cleaning when scrubbed repeatedly. Anti-static properties prevent dust build-up on the lenses, thus extending the period between maintenance cleaning.

DataSwatch™ – inbuilt virtual colour library

The DataSwatch™ inbuilt virtual colour library for Robe LED fixtures provides consistent colour rendering with commonly matched filter ranges, allowing for rapid and accurate programming.

MCFE™ – Multi Coloured Flower Effect

The Robe patented MCFE™ – Multi-Coloured Flower Effect – creates sharp, multi-coloured spikes of light, that are fully rotatable in both directions, at variable speeds.

Tungsten Emulation

When selected, the luminaire will mimic the colour temperature of a tungsten lamp as you lower the output to produce that classic warm glow.

L3™ – Low Light Linearity System

The L3™ Low Light Linearity System produces imperceptible, ultra-smooth fades to black.

REAP™ – Robe Ethernet Access Portal

The Robe Ethernet Access Portal allows to access internal data from a networked fixture, viewed as a web page, addressable via the fixtures network IP.

GDTF – General Device Type Format

The General Device Type Format creates a unified definition for exchange of data for the operation of intelligent luminaries, such as moving lights. The file format is human readable and developed using open source formats.

QVGA Robe Touch Screen Display System

The QVGA Robe touch screen display gives full access to all fixture setup and diagnostic functions and is very intuitive to navigate.

Product Video

Technical Specification

Expand AllDownload PDFCollapse All

Source

Light source type: 9x 40W RGBW LED multichips

LED life expectancy: min. 50.000 hours

Typical lumen maintenance: L70/B50 @ 50.000 hours

Optical system

Dynamic Effects and Features

Colour mixing mode RGBW or CMY

Individual control of each RGBW pixel

Variable CCT: 2.700K - 8.000K

Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)

DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K

Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction

3x MCFE™ - Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (Patented)

Motorized zoom

Pre-programmed random strobe & pulse effects

Electronic strobe effect with variable speed up to 20 Hz

High resolution electronic dimming: 0 - 100%

L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

Control and programming

Setting & Addressing: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 88 steps), built-in analyser for easy fault finding

Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net

REAP™ - Robe Ethernet Access Portal

Wireless CRMX™ technology from Lumen Radio - on request

Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity

DMX Protocol modes: 6

Control channels: 41, 61, 75, 84, 88, 97

RGBW / CMY: 8 or 16 bit

Zoom: 8 or 16 bit

Dimmer: 8 or 16 bit (internal 18 bit)

Movement

Thermal specification

Electrical specification and connections

Mechanical specification

Rigging

Included items

Optional accessories

Legal

Related News

20.3.2025

Robe Helps Unmask in Brazil

Lighting designer and DOP Alexandre (Alê) Augusto created a stunning lighting scheme for the latest series of The Masked Singer in Brazil, with his rental company, Spectrun Design e Iluminação, supplying the lighting equipment and production.

11.2.2025

Adding Nuance to Hikaru Utada Science Fiction Tour Design

Creative studio FragmentNine (F9) led by Jeremy Lechterman was asked by creative director / production designer Jason Ardizzone-West of JAW Studio to collaborate on the lighting elements of an impressive production design for J-pop singer/songwriter and superstar Hikaru Utada’s 2024 tour, as the artist returned to live performance after a six-year hiatus for an extensive tour of Japan and Asia, supporting a new album project, Science Fiction.

15.10.2024

Robe FOOTSIES and TetraXs for Gary Clark Jr Tour

Grammy Award-winning artist Gary Clark Jr is touring the world with his new album JPEG Raw, complete with a lighting scheme designed by John Adamo and Robert Fuller.

29.8.2024

Robe at PLASA 2024

Robe is using the buzz and hustle of the 2024 PLASA London expo to launch four new important and super-cool products – the iFORTE Fresnel, the PAINTE Fresnel, the SVOPATT and the SVB1.

Partner's websites:

We are proud sponsors of:

We are member of:

TetraX™

TetraX™

Product Video

Technical Specification

Related News

Navigate

Log in

Follow Us

Stay in Touch

Navigate

Log in

Follow Us

Stay in Touch